Korg TR - SEQ 3.3: Key Zone; 1: Key; 3: Slp; 5: Review

65
SEQ
1.1
1.22.12.23.13.23.33.44.14.24.34.45.15.26.17.17.2
Here you can specify the range of keys that will be sounded
by each track.
Top/Bottom Key settings specify the range of notes that will
be sounded by tracks 1–8, 9–16, and Top/Bottom Slope set-
tings specify the range from the top/bottom key until the
original volume is reached.
These settings do not affect MIDI transmission/recep-
tion. All note data that is received will be recorded into
the internal sequencer, and all note data from the inter-
nal sequencer or from the keyboard will be transmitted.
3.3–1: Key..8 (Key T01...08)
3.3–2: Key..16 (Key T09...16)
3.3–1(2)a: Key Zone Map
This shows the range of note data that will sound the cur-
rently selected track.
The note range that will be sounded is shown as a line, and
the slope portion is grayed. (☞p.39 COMBI 3.3–1a)
3.3–1(2)b: Top Key, Bottom Key
Top Key [C–1...G9]
Specifies the top key (upper limit) that will be sounded by
each track 1–8, 9–16.
Bottom Key [C–1...G9]
Specifies the bottom key (lower limit) that will be sounded
by each track 1–8, 9–16. For a diagram of Key and Slope
parameters, refer to “COMBI 3.3: Ed-Key Zone.”
You can also enter a value for these parameters by play-
ing a note while you hold down the [ENTER] key.
■ 3.3–1(2)c: UTILITY
☞ “Memory Status,” “Solo Selected Track,” “Rename Song,”
“Delete Song,” “Copy From Song,” “Copy From Combi,”
“Load Template Song,” “Save Template Song,” “FF/REW
Speed,” “Set Location” (1.1–1d)
3.3–3: Slp..8 (Slope T01...08)
3.3–4: Slp..16 (Slope T09...16)
3.3–3(4)a: Top Slope, Bottom Slope
Top Slope [00...72]
Specifies the key range (12 is one octave) from the top key
until the original volume is reached.
Bottom Slope [00...72]
Specifies the key range (12 is one octave) from the bottom
key until the original volume is reached.
■ 3.3–3(4)b: UTILITY
☞ “Memory Status,” “Solo Selected Track,” “Rename Song,”
“Delete Song,” “Copy From Song,” “Copy From Combi,”
“Load Template Song,” “Save Template Song,” “FF/REW
Speed,” “Set Location” (1.1–1d)
3.3–5: Review
3.3–5a: Key Zone Map (All)
T1...16
This shows the range of note data that will be sounded by
tracks 1–16. The note range that will be sounded is shown as
a line, and the slope portion is grayed.
■ 3.3–5b: UTILITY
☞ “Memory Status,” “Solo Selected Track,” “Rename Song,”
“Delete Song,” “Copy From Song,” “Copy From Combi,”
“Load Template Song,” “Save Template Song,” “FF/REW
Speed,” “Set Location” (1.1–1d)
SEQ 3.3: Key Zone
3.3–1b
1.1–1c
3.3–1a
3.3–1c
3.3–3a
1.1–1c
3.3–3b
3.3–5a
3.3–5b