Korg TR - 3: Arp. a (Arpeggiator A); 4: Arp. B (Arpeggiator B)

83
SEQ
1.1
1.22.12.23.13.23.33.44.14.24.34.45.15.26.17.17.2
Example 2)
For tracks 1, 2 and 3, set the “MIDI Channel” (3.1–1(2)a)
to 01, 02, and 03 respectively, and set “Status” (3.1–1(2)a)
to INT. Assign arpeggiator A to tracks 1 and 2, and
arpeggiator B to track 3. Check the “Arpeggiator Run A,
B” (6.1–1a) setting.
• In “Track Select,” choose Track01.
Playing the keyboard when the front panel [ARP ON/
OFF] key is off will play the sound assigned to track 1.
Playing the keyboard when the front panel [ARP ON/
OFF] key is on will cause arpeggiator A to operate for
tracks 1 and 2, and produce sound for both tracks.
• In “Track Select,” choose Track02.
Playing the keyboard when the front panel [ARP ON/
OFF] key is off will play the sound assigned to track 2.
Playing the keyboard when the front panel [ARP ON/
OFF] key is on will cause arpeggiator A to operate for
tracks 1 and 2, and produce sound for both tracks.
• In “Track Select,” choose Track03.
Playing the keyboard when the front panel [ARP ON/
OFF] key is off will play the sound assigned to track 3.
Playing the keyboard when the front panel [ARP ON/
OFF] key is on will cause arpeggiator B to operate for
track 3, and play the sound assigned to track 3.
• Alternatively, you could choose Track01 in “Track
Select” to run arpeggiator A for tracks 1 and 2, and use
an external MIDI device connected to the TR’s MIDI IN
to send note data to MIDI channel 3 to play arpeggiator
B.
■ 6.1–1(2)c: UTILITY
☞ “Memory Status,” “Rename Song,” “Delete Song,” “Copy
From Song,” “Copy From Combi” (1.1–1d), “Copy Arpeg-
giator” (COMBI 6.1–1c), “FF/REW Speed ,” “Set Loca-
tion” (1.1–1d)
6.1–3: Arp. A (Arpeggiator A)
6.1–4: Arp. B (Arpeggiator B)
Indicates settings for arpeggiator A in the Arp. A page, and
for arpeggiator B in the Arp. B page.
You can use the “Copy Arpeggiator” utility to copy set-
tings from another mode such as Program mode.
6.1–3(4)a: Arpeggiator–A(B) Setup
Pattern [P000...P004, U000(INT)...U215(User)]
Octave [1, 2, 3, 4]
Reso (Resolution) [   ,  ,   ,  ,   ,  ]
Gate [000...100(%), Step]
Velocity [001...127, Key, Step]
Swing [–100...+100(%)]
Sort [Off, On]
Latch [Off, On]
Key Sync. [Off, On]
Keyboard [Off, On]
These are the arpeggiator parameters for the song.
(
☞PROG 6.1: Ed–Arp.)
6.1–3(4)b:  (Tempo)
 (Tempo) [040…240, EXT]
☞1.1–1a
■ 6.1–3(4)c: UTILITY
☞ “Memory Status,” “Rename Song,” “Delete Song,” “Copy
From Song,” “Copy From Combi” (1.1–1d), “Copy Arpeg-
giator” (COMBI 6.1–1c), “FF/REW Speed ,” “Set Loca-
tion” (1.1–1d)
Pattern - B
Pattern - A
Pattern - A
Track2 MIDI Ch=2ch Status=INT
Arpeggiator
A
Arpeggiator
B
Arpeggiator
Assign
A
A
Pattern - A
Pattern - B
Trigger
= Ch1, Ch2
Trigger
= Ch3
Track3 MIDI Ch=3ch Status=INTB
Track1 MIDI Ch=1ch Status=INT
6.1–3a
6.1–3c
6.1–3b