Vehicle installation instruction(1)2-1
❶→❷→❸
Please refer to the sequence shown
in the figure for disassembly
NOTE
Please disassemble in the following order
5 N・m (0.5 kgf・m, 3.6 lb・ft)
1.5 N・m (0.15 kgf・m, 1.1 lb・ft)
❸
❶
❷
3
M5 washer X3
4
M5X12Lmm
Screw
X3
2
Meter bracket X1
Accessories
1-1
1
LCD Meter
X1
Light onFlash
Hold the
Button
3 seconds
Hold the
Button
1 second
Thank you for purchasing our product. Before installing/operating the product, please read the instructions carefully and retain them
for future reference.
Attention!
● For installation, please follow the steps described. Any damage caused by wrong installation shall be imputed to the users.
● To avoid a short circuit from occuring do not pull or modify the wires during installation.
● Do not disassemble or change any parts. Opening and dissassembling this unit will void any warranty.
● Maintenance and repairs should be executed by our professionals only.
Symbol description:
NOTE
WARNING!
Some procedures must be followed to avoid damages to the instrument.
Certain procedures must be followed to avoid damages to yourself, to the vehicle or others.
wh081ba08a(P17-1)
To Next Page
Need help?
General
