Need help?Do you have a question about the Kostal PIKO 15 and is the answer not in the manual?
General| Model | PIKO 15 |
|---|---|
| Rated Power | 15 kW |
| Max. apparent AC power | 15 kVA |
| Input Voltage Range | 200 V - 1000 V |
| Number of MPPTs | 2 |
| Max. input voltage | 1000 V |
| Efficiency | 98.4% |
| Protection Class | IP65 |
| AC frequency | 50/60 Hz |
| AC voltage | 400 V |
| Cooling | Natural convection |
Details the intended and inappropriate uses of the PIKO inverter.
Guides on selecting an appropriate installation site, considering environmental factors and safety.
Explains inverter and external connections, including AC and DC wiring requirements.
Provides instructions and warnings for connecting solar modules (PV strings) to the inverter.
Outlines the step-by-step procedure for initial commissioning and setup of the inverter.
Step-by-step guide on how to activate the inverter and start its operation.
Critical safety procedure for de-energizing the inverter before performing any work on it.
Explains how to access and use the service menu for installer-specific settings.
Lists and explains event codes, providing guidance for troubleshooting and error resolution.
Details the physical connection process between the inverter and a computer using an Ethernet cable.
Details methods for limiting PV feed-in capacity, including software-based and sensor-based options.
Explains how to activate active power control using a ripple control signal receiver from the energy supplier.
Guides on configuring self-consumption control functions through the inverter's web server interface.
Explains the procedure for updating the software on the inverter's communication board.
Details the process for updating the inverter's firmware to the latest version.
Presents detailed technical specifications for various PIKO inverter models, including input and output parameters.
To Next Page
