8
Trim the wire head to expose the
metal part and insert it into the"B"
interface.
The exit of the charging station
should be deployed in a clockwise
direction.
To set your mowing area, please
lay at least one stake per 100cm.
The perimeter wire must be kept tight.
If it is loose it may well end up being
cut by the mower as it passes over it.
If the wire passes over a moderate dip
in the lawn, more pegs will be required
to keep the wire firmly pegged at
ground level, or it risks being cut.
08 .
05 . 06 .
07.
To Next Page
Loading...