K
Kevin MoonAug 12, 2025
Why won't the burner flame light on my kozy heat Nordik 48 DV?
- SShelia KingAug 12, 2025
Several factors can prevent the burner flame from lighting. First, ensure the ON/OFF rocker switch is in the ON position and that the gas supply is turned on, checking for multiple shut-offs in the supply line. Low gas supply could also be the culprit, so check the propane tank and refill if necessary, or consult with a plumber or gas supplier. Other potential issues include wiring disconnections or improper wiring (refer to the electrical diagram), a plugged burner orifice (remove the blockage), or a pilot flame not properly directed to ignite the burner (refer to pilot flame troubleshooting). Replacing the batteries in the remote control, or verifying the remote control is powered ON and thermostat operation is turned OFF may also resolve the issue.