3-100 BA 35101/02/03 EN – Edition 1.0 * 35101_02_03b340.fm
Operation
3.67 Final decommissioning of machine
General information on decommissioning
If the wheel loader is no longer used according to its designated use, make sure it is
decommissioned or taken out of service and disposed of according to applicable regula-
tions.
Preparing disposal
• Follow all applicable safety regulations regarding machine decommissioning!
• Make sure the machine cannot be operated between decommissioning and disposal!
• Make sure there is no leakage of environmentally hazardous consumables, and that
the machine presents no other hazards at its storage place!
• Make sure the loader unit is fully lowered and that the bucket is placed horizontally on
the ground! Mount all protective devices!
• Make sure the parking brake is used to park the machine safely and to prevent it rolling
away and that the machine is secured in addition by placing chocks under the downhill
sides of the wheels!
• Secure the machine against unauthorised use! Safely lock all openings (doors,
windows, engine cover) of the machine!
• Repair all leaks on the engine, tanks, gearbox and hydraulic system!
• Remove the battery!
• Store the machine at a location that is secured against access by unauthorised
persons!
Avoid environmental damage!
Do not allow the oil and oily wastes to get into the ground or stretches of water!
Dispose of different materials and consumables separately and in an environ-
mentally friendly manner!
Disposal
Further recycling of the machine must be made in accordance with state-of-the-art stand-
ards applicable at the time of recycling, and in compliance with the safety regulations
regarding accident prevention!
• All parts must be disposed of (depending on material) at appropriate sites!
• Separate the material as you recycle parts!
• Ensure environmentally compatible disposal of consumables as well!
To Next Page
Loading...
Need help?
General
