EasyManua.ls Logo

Kramer 380 - User Manual

Kramer 380
228 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operator's Manual
Wheel loaders
//
Models 351-01 / 351-02 / 351-03
From serial nos. 351 01 0001 / 351 02 0001 / 351 03 0001
Edition 1.0
Order number 1000245584
Language EN

Table of Contents

Questions and Answers

  • S
    Sara CampbellJul 27, 2025
    How to fix a Kramer Compact Loader that won't start?
    • D
      Dustin FreemanJul 27, 2025
      If your Kramer Compact Loader isn't starting, several factors could be at play. First, verify that the parking brake is applied and the drive lever is in neutral. Also, ensure that you are using the correct SAE grade of engine lubrication oil and that the fuel grade complies with specifications. Other potential causes include a defective or flat battery (check and replace if necessary), loose or oxidized cable connections in the starter circuit (inspect and secure them), or a defective starter. Furthermore, you may need to bleed the fuel system, adjust the valve clearance, or replace a defective fuel injector.
  • J
    Jonathan JonesAug 1, 2025
    What to do if my Kramer Compact Loader engine overheats?
    • J
      joel75Aug 1, 2025
      If your Kramer Compact Loader engine is overheating, start by checking the oil level to ensure it's neither too low nor too high. A dirty air filter can also cause overheating, so clean or replace it. Inspect the oil radiator fins and clean them if they're dirty. Also, check the fan and replace or tighten the V-belt if it's defective or loose. Additionally, check and repair the air filter maintenance switch or gauge.
  • D
    Danielle CastanedaAug 6, 2025
    Why is my Kramer 380 engine power so low?
    • R
      Rachel KruegerAug 6, 2025
      If your Kramer Compact Loader has insufficient engine output, first ensure that the oil level is not too high and that the fuel grade complies with the required specifications. Additionally, check for a dirty air filter and clean or replace it if necessary. Also, check and repair the air filter maintenance switch or gauge. It may also be necessary to bleed the fuel system.
  • O
    Oscar PearsonAug 11, 2025
    How to troubleshoot a Kramer 380 engine that runs rough?
    • A
      Aaron HerreraAug 11, 2025
      If your Kramer Compact Loader engine starts but doesn't run smoothly, one potential cause is that the fuel grade does not comply with specifications, so you should ensure that it does. It may also be necessary to bleed the fuel system. If those fixes don't work, a defective fuel injector may need to be replaced.
  • M
    Matthew PriceAug 16, 2025
    Why is my Kramer Compact Loader blowing smoke?
    • P
      Pamela ThompsonAug 16, 2025
      If your Kramer Compact Loader is emitting smoke, the cause varies by color. Blue smoke suggests the oil level is too high, so ensure it is at the correct level. White smoke may indicate the engine starting temperature is not adequate, so ensure it is. Black smoke could mean the air filter is dirty; in this case, clean or replace it, and check and repair the air filter maintenance switch or gauge. Finally, ensure the fuel grade complies with specifications.
  • B
    brandongrantAug 21, 2025
    What causes low oil pressure in a Kramer 380 Compact Loader?
    • R
      Robert KelleyAug 21, 2025
      If your Kramer Compact Loader has insufficient or no engine oil pressure, the oil level might be too low, so ensure the oil level is adequate. Also, ensure that you are using the correct SAE grade of engine lubrication oil.

Summary

Introduction to Wheel Loader Operation

General Information on Machine Safety

Covers general safety principles for machine operation and maintenance.

Machine Outside View

Illustrates and labels external components of the wheel loader.

Models and Trade Names Overview

Lists the different wheel loader models and their trade names.

Fields of Application and Using Attachments

Explains the machine's uses and guidelines for operating with attachments.

Legal Regulations for Wheel Loader Operation

Outlines legal requirements and safety instructions for operating the wheel loader.

Type Labels and Component Numbers

Explains identification labels for machine model, serial, and component numbers.

Safety Instructions for Wheel Loader Use

Identification of Warnings and Dangers

Explains symbols and terms used to identify hazards and warnings in the manual.

Designated Use and Liability Exemption

Defines the intended use of the machine and limits manufacturer liability.

General Conduct and Safety Instructions

Covers general safety rules, organizational measures, and operator responsibilities.

Safety Instructions Regarding Operation

Provides critical safety guidelines for operating the wheel loader.

Safety Instructions for Maintenance

Outlines safety precautions and procedures for maintenance and repair work.

Warning of Special Hazards

Details specific hazards related to electricity, gas, hydraulics, noise, and chemicals.

Wheel Loader Operation Guide

Description of Control Elements

Describes the function and location of various controls in the cab.

Cab Overview

Provides an illustrated overview of the components within the machine's cab.

Instrument Panel and Lever Overview

Details the instrument panel, levers, and switches for machine operation.

Putting the Wheel Loader into Service

Guides on the initial setup, operational readiness, and first use of the machine.

Starting the Engine

Provides step-by-step instructions for starting the diesel engine.

Stopping the Engine

Outlines the correct procedure for safely shutting down the engine.

Parking Brake Operation

Details the operation and importance of the parking brake for safety.

Driving the Machine

Covers selecting speed ranges and operating the machine for movement.

Towing the Machine

Details safety instructions and procedures for towing the machine.

Loading and Transporting the Machine

Covers safety instructions and procedures for loading and transporting the machine.

Working with a Bucket

Covers fields of application and safety instructions for working with a bucket.

Working with Pallet Forks

Covers general safety instructions for working with pallet forks.

Maintenance Procedures for Wheel Loaders

Important Information on Maintenance

Provides essential guidelines and safety precautions for maintenance personnel.

Fuel System Maintenance

Covers safety instructions, fuel specifications, and refueling procedures.

Engine Lubrication System Maintenance

Details inspections and maintenance for the engine lubrication system.

Cooling System Maintenance

Covers general instructions and checks for the cooling system.

Hydraulic System Maintenance

Covers safety instructions and general procedures for hydraulic system maintenance.

Lubrication Work Procedures

Covers general safety instructions and specific lubrication points on the machine.

Brake System Maintenance

Details specific safety instructions and procedures for brake system maintenance.

Tyre Checks and Maintenance

Covers daily tyre checks and wheel changing procedures.

Electrical System Maintenance

Provides general instructions and safety precautions for the electrical system and battery.

General Cleaning and Maintenance Work

Covers general cleaning procedures and safety instructions for different machine parts.

Maintenance Plan Schedule

Provides a detailed schedule for service and maintenance tasks.

Wheel Loader Specifications

Models and Trade Names Overview

Lists the wheel loader models and their corresponding trade names.

Engine Specifications

Provides detailed specifications for the Deutz diesel engine.

Drive System Specifications

Details specifications for the variable displacement pump and motor.

Axle Specifications

Provides specifications for the front and rear axles, including differential locks and steering angles.

Brake System Specifications

Details the design and fluid specifications for the service and parking brakes.

Steering System Specifications

Covers the hydrostatic 4-wheel steering system, including types and displacement.

Payload Capacities

Details payloads for the loader unit with bucket and pallet forks.

Wheel Loader Dimensions with Bucket (Model 351-01)

Lists the dimensions of the wheel loader model 351-01 with a bucket.

EC Declaration of Conformity

EC Declaration of Conformity (Model 351-01)

Declares conformity of model 351-01 with EC directives and standards.

EC Declaration of Conformity (Model 351-02)

Declares conformity of model 351-02 with EC directives and standards.

EC Declaration of Conformity (Model 351-03)

Declares conformity of model 351-03 with EC directives and standards.

Kramer 380 Specifications

General IconGeneral
BrandKramer
Model380
CategoryCompact Loader
LanguageEnglish

Related product manuals