BA 35101/02/ 03 EN – Edition 1.0 * 35101_02_03b110.fm 1-1
Introduction
1 Introduction
1.1 General information on the Operator's Manual
This Operator's Manual applies to the wheel loaders model 351-01/351-02 and contains
important information on how to work safely, correctly and economically with the machine.
Therefore, it aims not only at new operators, but it also serves as a reference for experi-
enced ones. It helps to avoid dangerous situations and reduce repair costs and down-
times. Furthermore, the reliability and the service life of the machine will be increased by
following the instructions in the Operator's Manual. This is why the Operator's Manual
must always be kept at hand in proper condition in the machine.
The Operator's Manual is stored in the storage compartment on the backrest of the seat.
Please contact your dealer if you require more information on the machine or the Opera-
tor's Manual.
Abbreviations/symbols
☞ This symbol requires you to carry out the activity described
☞ Subdivision within lists or an activity. Follow the steps in the recommended sequence
• This symbol stands for a list
• Subdivision within lists or an activity.
➥ Description of the effects of an activity (result)
“Option” = optional equipment
Stated whenever controls or other components of the machine are installed as an option.
Driving direction in drawings or figures.
1.2 General information on machine safety
Your own safety, as well as the safety of others, depends to a great extent on how the
machine is moved and operated. Therefore, carefully read and understand this Operator's
Manual prior to the first drive. Also read chapter “Safety instructions” in order to be pre-
pared for possible dangerous situations as it will be too late for it during operation. As a
rule, keep the following in mind:
Careful and prudent working is the best way to avoid accidents!
➥ – see chapter 2 “Selection and qualification of staff, basic responsibilities” on page 2-5
Operational safety and readiness of the machine do not only depend on your skill, but also
on maintenance and servicing of the machine.
This is why regular maintenance and service work is absolutely necessary.
Extensive maintenance and repair work must always be carried out by an expert with
appropriate training.
Insist on using original spare parts when carrying out maintenance and repair work. This
ensures operational safety and readiness of your machine, and maintains its value.
The machine's permits, certifications, registrations, etc., may be withdrawn if machine
parts/components with a prescribed condition or quality, or machine parts/components
that can put persons at risk during operation, are subsequently modified or exchanged.
Introduction
To Next Page
Loading...
