3-36 BA 35101/02/03 EN – Edition 1.0 * 35101_02_03b330.fm
Operation
3.24 Parking brake
General instructions regarding the parking brake
The parking brake is located to the right of the control lever base.
A starting interlock prevents the machine from starting even with the parking brake slightly
applied.
The driving direction can only be selected if the parking brake is completely
released.
Applying the parking brake automatically cancels the selection of the forwards/
reverse driving direction (drive) and switches the drive to neutral.
Applying the parking brake
When driving the machine, apply the parking brake only in an emergency. The
brake lights do not come on in this case!
☞ In normal operation use only the brake/inching pedal as a service brake
☞ Apply the parking brake
• Pull lever 18 up to the last notch
➥Telltale 81 on the indicating instrument comes on
➥The engine can be started
➥Selection of forwards/reverse driving direction (drive) is automatically cancelled and
neutral activated
• Secure the machine with wheel chocks –seeStopping/parking the machine on
page 3-58
☞ Release the parking brake
• Pull lever 18 up slightly
• Press button A
• Move lever 18 down as far as it will go
➥Telltale 81 on the indicating instrument goes out
18
Fig. 60: Applying and releasing the parking brake
A
P
81
To Next Page
Loading...
