BA 35101/02/ 03 EN – Edition 1.0 * 35101_02_03b330.fm 3-47
Operation
3.35 Auxiliary heating (option)
Operating and setting the auxiliary heating
At engine standstill, the auxiliary heating warms up the coolant and the cab.
Double advantage: warm cab and preheated engine!
☞ Adjust the vehicle heater as follows before setting (programming) the timer:
• Turn fan switch 87 of the vehicle heater to positions 1 – 3
• Set temperature switch 88 to the required temperature
➥ W = warm (red)
• Set the auxiliary heating timer
Refer to the Operator's Manual of the auxiliary heating supplied with the machine
for operating and setting (programming) the timer.
Danger of explosion near filling and service stations and places where inflam-
mable vapours or dust may arise!
Danger of poisoning and suffocation when operating the auxiliary heating in
enclosed areas!
☞ Switch off the auxiliary heating when refuelling the machine
☞ Switch off the auxiliary heating in enclosed areas
II
CW
III
I
0
8887
Fig. 74: Auxiliary heating timer
To Next Page
Loading...
