EasyManua.ls Logo

Kramer 380 - Cleaning the Heat Exchanger (Condenser)

Kramer 380
228 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA 35101/02/ 03 EN – Edition 1.0 * 35101_02_03b510.fm 5-29
Maintenance
Cleaning the heat exchanger (condenser)
☞ Proceed as follows:
• Stop the engine
• Apply the parking brake
• Switch off ignition and remove the ignition key
• Remove intake screen A from the counterweight
• Remove fastening screws B from the heat exchanger and fold away
heat exchanger C
• Clean the heat exchanger with a water jet (do not use a high-pressure cleaner or
compressed air)
Caution!
Do not damage the fins as you clean the heat exchanger!
• Clean the air intake area
• Install intake screen A onto the counterweight
• Install heat exchanger C after cleaning
Caution!
Have the air conditioning system checked twice a year by trained staff in an
authorised workshop!
Furthermore, replace dehumidifier D twice a year!
• The dehumidifier is located in the engine compartment under the engine
cover lock
Fig. 186: Air conditioning: heat exchanger, dehumidifier
A
D
B
C

Table of Contents