3-80 BA 35101/02/03 EN – Edition 1.0 * 35101_02_03b340.fm
Operation
Safety instructions for transporting material in a full multipurpose bucket
In order to avoid danger of accidents, do not transport loads with a raised
loader unit!
Always dump in the multipurpose bucket a little towards the machine, carry it
as close as possible to the ground and bear in mind the required ground
clearance!
If it is dumped in, the multipurpose bucket is moved parallel to its initial position
as the loader unit is raised! If the multipurpose bucket is unintentionally
dumped in to the limit in the raised position, material can fall over the rear of
the bucket!
☞ In the raised position, do not dump in a loaded multipurpose bucket
to the limit
☞ Slightly readjust (dump out) the multipurpose bucket if necessary
☞ In case of a bulky load:
• Secure the load and if necessary, fit the rear of the
bucket with a protection
• Install a protective FOPS screen (option) onto the cab
☞ Ensure good visibility of the material you want to pick up and of the work
and travel range
In order to avoid tipping over when driving or manoeuvring on slopes with a
full multipurpose bucket, dump in the multipurpose bucket fully and and set the
loader unit to transport position!
☞ Whenever possible, drive in reverse when transporting a bucket loaded
with material down a steep slope
Driving on public roads with a full multipurpose bucket is
not allowed in Germany!
Get informed on and follow the legal regulations of your country.
To Next Page
Loading...
