3-72 BA 35101/02/03 EN – Edition 1.0 * 35101_02_03b340.fm
Operation
Removing material/digging in soft soil
☞ Digging in soft soil
• Place the bucket horizontally on the ground B. To do this: push the control lever
forwards C
• Adjust the digging angle 1. To do this: push the control lever to the right B
• Drive the machine forwards 1
☞ Once the bucket has penetrated the soil:
• Set the digging angle a little flatter 2. To do this: push the control lever to the left A, so
that the layer being removed is as even as possible and so that the wheel spin is
reduced
• Proceed as for loading loose material
Fig. 114: Lowering the loader unit to the ground
C
B
1
Fig. 115: Adjusting the digging angle
1
B
Fig. 116: Removing an even layer
2
1
A
To Next Page
Loading...
