EasyManua.ls Logo

Kramer 380

Kramer 380
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA 35101/02/ 03 EN – Edition 1.0 * 35101_02_03b330.fm 3-43
Operation
3.31 Machine lights
Machine lights operation
The switch for the machine lights is located on the switch panel on the left-hand side of the
instrument panel.
Important!
Only the side marker lights stay lit if ignition is switched off while low beam is
still switched on!
I
0
Fig. 67: Light system
B
A
68
39
II
I
84
Side marker light operation Function
ON Press switch 68 to the 1st position B Telltale in switch comes on
OFF Press switch 68 down to position A Telltale in switch goes out
Low beam operation Function
ON
Press switch 68 to the
2nd position B and pull lever 28 to
position II
Telltale in switch comes on
OFF Press switch 68 down to position A Telltale in switch goes out
High beam operation Function
ON
Press switch 68 to the
2nd position B and push lever 39 to
position I
Telltale (blue) 84 on the indicating instru-
ment comes on
OFF Pull lever 39 to position II
Telltale (blue) 84 on the indicating instru-
ment goes out
Low beam comes on
Headlight flasher operation Function
ON
Briefly pull lever 39 fully up (beyond
position II)
Telltale (blue) 84 on the indicating instru-
ment comes on

Table of Contents

Related product manuals