BA 35101/02/03 EN – Edition 1.0 * * 35201_02b310.fm 3-1
Operation
3 Operation
3.1 Description of control elements
This chapter describes the controls, and contains information on the function and the handling of the telltales and controls in the cab.
The pages stated in the table refer to the description of the controls.
A combination of digits, or a combination of digits and letters (e.g. 40/18 or 40/A) used for identifying the control elements, means:
fig. no. 40/control element no. 18 or position A in fig. no. 40
Figures carry no numbers if they are placed to the left of the text.
You can unfold pages (3-2 and/or 3-4) for a better overview.
The symbols used in the description have the following meanings:
• This symbol stands for a list
• Subdivision within lists or an activity. Follow the steps in the recommended sequence
☞ This symbol requires you to carry out the activity described
➥ Description of the effects or results of an activity
n. s. = not shown
“Option” = optional equipment
Stated whenever controls or other components of the machine are installed as an option.
Operation
Cab overview: see overleaf
To Next Page
Loading...
