BA 35101/02/ 03 EN – Edition 1.0 * 35101_02_03b330.fm 3-37
Operation
3.25 Driving the machine
Selecting a speed range
The machine has two speed ranges.
The switch for selecting the speed range is located on the switch console on the right-hand
side of the instrument panel.
☞ Select the 1st speed range
• Set driving direction to neutral with tip switch 102 on the joystick
• Press switch 63 to position A
• Select the driving direction (F or R) with switch (scroll wheel) 103
☞ Select the 2nd speed range
• Press switch 63 to position B
• Select the driving direction (F or R) with switch (scroll wheel) 103
• Gradually press down the accelerator pedal
➥ Machine moves off
• Test the brakes at low speed
Fig. 61: Speed range selection switch
B
A
103
102
63
F
R
Speed range
symbol
Speed range Recommended
1st speed range
0– 7 kph
Used for work involving short loading
cycles, i.e. a rapid succession of loading
and unloading operations, e.g. onto a
truck, and for work requiring precise
speed adjustment, e.g. rotary broom
applications.
2nd speed range
0 – 20 kph
0 – 30/40 kph (option)
For long-haul travel
To Next Page
Loading...
