3-10 BA 35101/02/03 EN – Edition 1.0 * 35201_02b320.fm
Operation
3.6 Checklist
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring jobs listed below are described in greater detail in subse-
quent chapters of the Operator's Manual.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before starting or continuing work.
Starting checklist
Check the following points before putting the machine into service or starting the engine:
No. Starting checklist ✔
1 Enough fuel in the tank? (➠ 5-3)
2 Engine oil level OK? (➠ 5-5)
3 Oil level in hydraulic tank OK? (➠ 5-16)
4 Water level in washer tank OK? (➠ 3-2)
5 V-belt condition and tension checked? (➠ 5-13)
6 Loader unit lubricated? (➠ 5-20)
7 Brake system (including parking brake) OK? (➠ 3-35)
8 Tyre condition and inflation pressure OK? (➠ 5-24, 6-11)
9
Wheel nuts safely tightened (especially after a wheel change)?
(➠ 6-13)
10
Lights, signals, indicators, warning lights and telltales OK?
(➠ 3-43, 3-45, 3-6)
11 Windows, mirrors, lights and steps clean?
12 Attachment on the loader unit safely locked? (➠ 3-63)
13 Engine cover safely locked? (➠ 3-14)
14
Especially after cleaning, maintenance or repair work:
Rags, tools and other loose objects removed?
15
Approved warning triangle, hazard warning light and first aid kit in the
machine?
16 Seat position and rearview mirrors correctly adjusted? (➠ 3-50)
17 Seat belt fastened? (➠ 3-53)
To Next Page
Loading...
