5-44 BA 35101/02/03 EN – Edition 1.0 * 35101_02_03b520.fm
Maintenance
5.22 Explanation of symbols on the maintenance label
Symbol Explanation
Before starting maintenance work, follow the safety instructions in the Operator's Manual!
Before starting maintenance work, read the “Maintenance” chapter in the Operator's Manual!
Carry out a functional check of the light system!
Check tyres for damage, pressure and tread depth!
Carry out a functional check and synchronise the steering system!
Carry out a functional check of the brake system!
Check hydraulic oil level. Fill up if necessary!
Check engine oil level. Fill up if necessary!
Compress the dust valve
Check radiator for engine coolant and hydraulic oil for contamination. Clean if necessary!
Check condition and initial tension of V-belt. Retighten or replace if necessary!
Leakage check:
Check for tightness, leaks and chafing: pipes, flexible lines and screw connections. Rectify if necessary!
Leakage check:
Check the fuel/water separator. Drain water if necessary!
Lubrication service:
Lubricate the assemblies concerned!
To Next Page
Loading...
