4-40 BA 35203_04 * 3.0 * 35203_04_04_Inbetriebnahme_04.fm
4 Putting into operation
G
Indicator display – DPF (diesel particulate filter)
and fill level of urea solution
– see chapter 7 “Exhaust gas treatment” on
page 7-73.
• Symbol 1 lights up continuously:
Regeneration of the DPF is in operation.
• Symbol 2 flashes: put regeneration of the DPF
into operation manually
• Symbol 3 lights up continuously:
load state of the DPF is too high.
➥ Diesel engine output is reduced.
➥ Contact an authorized service centre.
• Symbol 4 lights up: fill level of the urea is
below 15%.
➥ Top off urea immediately
– see chapter 7 “Fluids and lubricants” on
page 7-12.
H ...km/h Indicator display – travel speed
I ...rpm Indicator display – diesel engine speed
J ...bar
Indicator display – compressed-air braking sys-
tem
To Next Page
Loading...
