EasyManua.ls Logo

Kramer 8105

Kramer 8105
422 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-105
Operation 5
5.13 Options
Load hook (option)
Shaft rings, containers, pipes, etc., can be transported with a load hook
and suitable lifting gear (belts, cables, chains).
WARNING
Injury hazard when working with a load hook!
Observe the following precautionary measures in order to avoid a danger
of accident!
Read and observe the section Lifting gear applications on page 2-9 in
the safety instructions chapter.
Bear in mind the load diagram on the front window.
Move loads only on firm and level ground.
Wear protective gloves.
Ensure that the ratchet safely engages in the hook as you hook up the
lifting gear (belts, cables, chains).
Do not use damaged lifting gear.
Never place the lifting gear over sharp edges.
Adapt your speed to the load as you move it near to the ground.
Persons guiding the load must stay in visual contact with the machine
operator.
Do not transport loads on public roads.

Table of Contents

Related product manuals