BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm 7-1
Maintenance 7
7 Maintenance
7.1 Information on maintenance
Responsibilities and prerequisites
• Operational readiness and the service life of the machine are heavily
dependent on maintenance and care.
• The "daily maintenance" and "work every 20 hours of operation"
indicated in the maintenance schedule have to be performed by a
specially trained operator.
• Have the following maintenance performed by an authorized service
center otherwise warranty claims will not be acknowledged:
- Delivery inspection,
- Oil and filter replacement every 500 o/h,
- 1st inspection at 100 o/h,
- Every 500 o/h,
- 1500 o/h (once a year)
• The manufacturer shall not be liable for damage or personal injury
caused by failure to observe instructions!
• Please contact your dealer if you require more information on
maintenance and service work.
• Insist on using original spare parts for repairs.
The machine’s permits, certifications, registrations, etc., may be
withdrawn if machine parts/components with a prescribed condition or
quality, or machine parts/components that can put persons at risk
during operation, are subsequently modified or exchanged.
Important safety instructions regarding maintenance
Injury hazard due to maintenance!
Injury hazard!
► Apply the parking brake.
► Stop the engine and remove the starting key.
► Observe the danger indications and safety instructions during
maintenance.
► Always park the machine on firm and level ground and secure it to
prevent it from rolling away.
► Secure the raised loader unit against unintentional lowering.
► Remove the key of the battery master switch if the machine is
equipped with this option.
► Follow the maintenance and safety instructions given in the Operator’s
Manuals of the attachments.
Maintenance
To Next Page
Loading...
