7-60 BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm
7 Maintenance
7.16 Axles/travelling drive
Maintenance on axles/drive
If the oil temperature of the drive hydraulics is over 105°C (221 °F), the
travel speed (travel dynamics) is automatically reduced by 50% until the
oil temperature is below 105°C (221 °F) in order to avoid damage to the
drive hydraulics.
► Have the cause for the high oil temperature checked or repaired by an
authorized service centre under all circumsances.
Maintenance work on the axles and drive may only be performed by an
authorized service center for reasons of safety and to ensure warranty
and liability claims.
Observe the maintenance intervals – see “Maintenance plan” on page 7-3.
Specifications and fill quantities – see “Fluids and lubricants” on page 7-12.
To Next Page
Loading...
