Kramer 8105

BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-55
Operation 5
Operation of the 7-pole plug receptacle
The power supply can be set to push-button or continuous operation, or
switched off, with the toggle switch 43 in the switch console.
Changeover between both electrical circuits is possible with the touch
button 85 on the joystick (for electrical attachments with two different
electrical functions).
Fig. 156
43
85
A
C
B
1 2
P
Operation Function
Push-button
operation
Press switch 43 to position B.
➥ Symbol P/2 appears
in the digital display.
➥ Electrical circuit 2 is
enabled.
Press and hold the touch
button 85
.
➥ Symbol P/1 appears
in the digital display.
➥ Electrical circuit 1 is
enabled.
OFF Press switch 43 to position A.
➥ The power supply is
switched off.
Operation Function
Continuous
operation
Press switch 43 to position C.
➥ Symbol P/2 appears
in the digital display.
➥ Electrical circuit 2 is
enabled.
Press the touch button 85
to
change over to electrical
circuit 1 or 2.
➥ Symbols P/2 or P/1
appear in the digital
display.
OFF Press switch 43 to position A.
➥ The power supply is
switched off.