5-98 BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm
5 Operation
Transporting material
• Move the load only when it is safely placed on the fork arms.
• Start, turn and stop smoothly.
• Concentrate on your work, avoid distractions.
• When moving and transporting loads, always tilt it slightly back toward
the machine and raise or lower it to transport position (bear in mind the
ground clearance).
• Always perform machine travel slowly in off-road applications, to avoid
strong swinging movements of the load.
• On slopes, the load must be on the uphill side of the machine/attachment.
• Drive the machine backward on sloping terrain to prevent the load from
falling off and the machine from tilting forward when braking.
• When transporting large bulk loads, perform backward machine travel
for improved visibility.
Fig. 210
Ansicht_024.iso
Ansicht_020.iso
To Next Page
Loading...
