BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-123
Operation 5
Coupling a trailer brake hose
Clean the plug coupling carefully before connecting the flexible line of the
trailer in order to ensure correct functioning and sealing!
► Inspections and maintenance on the hydraulic brake may be
performed only by trained personnel or an authorized service centre.
1. Attach trailer to the ball hitch – see “Hitching a trailer” on page 5-111.
2. Clean the brake hose and plug coupling A.
3. Couple the brake hose onto plug coupling A.
4. Establish the electric and hydraulic connections between the trailer
and the tractor vehicle.
5. Remove the wheel chocks from the wheels of the trailer and safely
store them on the trailer.
6. Release the trailer brake.
➥ Refer to the Operator’s Manual of the trailer.
To Next Page
Loading...
