BA 35203_04 * 3.0 * 35203_04_05_Bedienung.fm 5-127
Operation 5
For safety reasons, the low-speed control is also disabled when:
• the engine is restarted or
• the speed "Hare" is chosen.
If the low-speed control was disabled, the function must be reactivated
and set.
Fig. 234
kph0
rpm
0
III
IV
0
bar
H
32
A
B
31
88
D
N
3
Operation Lever position Result
Disabling the
low-speed control.
1. Push the slide
control 32 all the way
to the rear B.
➥ The speed H is
reduced to 0 km/h
(0 mph). The
engine speed
saved via the
manual throttle is
preserved.
2. Once the work
operation is
completed, press the
touch button 88
"Neutral travel
direction."
➥ The speed of the
diesel engine falls
to the lower idling
speed. The manual
throttle is disabled
– see “Disabling
manual throttle in
the “Turtle” speed
range” on
page 5-12.
➥ Symbol D/3
appears in the
digital display.
3. Push the slide
control 32 all the way
forward A for normal
work operation.
➥ The speed is
regulated via the
accelerator pedal.
To Next Page
Loading...
