BA 35203_04 * 3.0 * 35203_04_06_Transport.fm 6-3
Transport 6
Once towing is over
Reset the variable displacement pump to drive operation once towing the
machine is over!
1. Secure the machine with wheel chocks.
2. Remove the towing gear.
3. Screw in both high-pressure valves A on the variable displacement
pump and tighten them to 70 Nm (wrench size 22 mm – 0.87 in).
4. In case of diesel engine and/or hydraulic drive breakdown, have an
authorized service centre perform repair work.
To Next Page
Loading...
