BA 35203_04 * 3.0 * 35203_04_07_Wartung.fm 7-9
Maintenance 7
Service indication
The maintenance intervals are indicated by the service indication in the
digital display.
Description – see chapter 4 “Overview of control elements” on page 4-29.
Maintenance intervals – see “Maintenance plan” on page 7-3.
Check bolts and nuts
1
for tightness,
retighten them if necessary:
Service
centre
User/operator Service centre
Delivery
inspection
Maintenance work
(daily)
Every 20 o/h
“A”
1st Inspection
at 100 o/h
“B” 2nd Inspection
then every
500 o/h
“C”
every 1500 o/h
once a year
Engine and engine bearing ● ●●●
Exhaust system ●
●●●
Steering system
2
● ●●●
Hydraulic system ●
●●●
Loader unit (pin locking) ●
●●●
Axle mounting, axle suspension ●
●●●
Counterweight (attachment) ●
●●●
Fastening screws of cardan shafts ●
●●●
Cabin fastening screws ●
●●●
Wheel nuts ●
●●●
Trailer couplings (option) ●
●●●
1. Have the 1st inspection at 100 hours of operation and the 2nd inspection at 500 hours of operation performed by an authorized service center otherwise
warranty claims will not be acknowledged
2. Safety part! Have maintenance and repairs performed only by an authorized service center.
20.6
Fig. 248
479.4
3:32
III
IV
To Next Page
Loading...
