8-10 BA 35203_04 * 3.0 * 35203_04_08_Betriebsstoerung.fm
8 Malfunctions
Error code overview – Electronics of work hydraulics
Errors may be rectified and repairs may be performed only by an
authorized service centre.
Overview of error codes for work hydraulics
Error code Possible causes Remedy
517551
Control unit flash – flash memory
Critical error
Stop the machine immediately
and have the error rectified by
an authorized service centre.
Application – machine configuration (object initialization failed)
517900
Control unit, internal
517901
517902 Control unit communication, internal
517903 Control unit power supply
517904 Control unit environmental data – application timeout
517905 VCU power supply too high
517908
Internal control unit memory
517909
517910
517911
517912
517913
518987 Telescope scroll wheel error/4th control circuit in the joystick
519358 Differential lock – solenoid valve (differential lock)
519360 Solenoid valve 3rd control circuit continuous function error
519361 Error solenoid valve 4th control circuit/raise tipping trailer
519369
Load stabilizer – load stabilizer solenoid valve
519370
519371 Hose burst valve disabling – solenoid valve (hose burst valve)
To Next Page
Loading...
