Kramer VP-434 - 6 Controlling the VP-434; 6.1 Controlling via the Front Panel Buttons; 6.2 Using the CONTROL Buttons

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling the VP-434
10
6 Controlling the VP-434
The VP-434 can be controlled directly via the front panel buttons (see section
6.1), via the OSD menu (see section 6.2), and/or remotely from the infra-red
remote control transmitter (see section 6.3).
6.1 Controlling via the Front Panel Buttons
The VP-434 includes the following front panel buttons:
 An Input selector button for selecting the required input (UXGA or
COMP)
 A resolution (Res.) button for selecting the desired resolution
 Control buttons, including the MENU, ENTER, + and – buttons
6.2 Using the CONTROL Buttons
The CONTROL buttons let you control the VP-434 via the OSD menu. Press
the:
 MENU button to enter the menu
1
 ENTER button to accept changes and to change the menu settings
 + and – buttons to move through the OSD menu, which is displayed on
the video output
On the OSD menu, select EXIT to exit the menu.
1 The default timeout is set to 10 seconds