Kramer VP-434

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-434 Component / UXGA HDMI Scaler
6
Table 1: VP-434 Component / UXGA HDMI Scaler Front Panel Features
# Feature Function
1 IR Receiver Receives signals from the remote control transmitter
2 Selector Button Press to select the UXGA input or the COMP input
3 UXGA Indicator LED Lights when the UXGA input is selected
4
Input
COMP Indicator LED Lights when the COMP input is selected
5 Selector Button Press to select the resolution: 480p, 576p, 720p, 1080i or 1080p
6 480p Indicator LED Lights when the 480p resolution is selected
7 576p Indicator LED Lights when the 576p resolution is selected
8 720p Indicator LED Lights when the 720p resolution is selected
9 1080i Indicator LED Lights when the 1080i resolution is selected
10
Res.
1080p Indicator LED Lights when the 1080p resolution is selected
11 MENU Button Displays the OSD menu (see section 6.2)
12 ENTER Button Press to accept changes and change the SETUP parameters
1
13 - Button Press to move down the menu list
1
14
Control
+ Button Press to move up the menu list values
1
Table 2: VP-434 Component / UXGA HDMI Scaler Rear Panel Features
# Feature Function
15 HDMI Out Connector Connects to the HDMI acceptor
16 3.5mm Mini Jack Connector
Connects to the analog unbalanced stereo audio signal
source
17
UXGA In
UXGA HD15F Connector Connects to the UXGA source
18 L RCA Connector
19 R RCA Connector
Connect to the left and right analog unbalanced stereo
audio source (of the COMP source)
20 P R RCA Connector
21 P B RCA Connector Connects to the component video source
2
22
COMP In
Y RCA Connector
23 Remote Contact Closure Pins Connects to a contact closure switch (see section 5.1)
24 12 VDC +12V DC connector for powering the unit
1 See section 6.2.2
2 For component video, connect all three connectors: Y, Cb, Cr (also known as YUV)