Kramer VP-434 - 3.2 Recommendations for Best Performance; 4 Your VP-434 Component; UXGA HDMI Scaler

Your VP-434 Component / UXGA HDMI Scaler
5
3.2 Recommendations for Best Performance
To achieve the best performance:
 Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
 Avoid interference from neighboring electrical appliances and position
your Kramer VP-434 away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
1
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
4 Your VP-434 Component / UXGA HDMI Scaler
Figure 1, Table 1 and Table 2 define the VP-434 Component / UXGA HDMI
Scaler:
Figure 1: VP-434 Component / UXGA HDMI Scaler – Front and Rear View
1 For example: model number AD2512C, part number 2535-000251