Kramer VP-434

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling the VP-434
12
6.3 Controlling via the Infra-Red Remote Control Transmitter
You can control the VP-434 from the infra-red remote control transmitter, as
Figure 4 and Table 5 define:
Table 5: Infra-Red Remote Control
Transmitter Functions
Keys Function
SIZE Set the size of the image displayed
POWER Turn the transmitter ON or OFF
HD Select the component video input
PC Select the UXGA input
HDMI Not used
VGA Set the output resolution to VGA
SVGA Set the output resolution to SVGA
XGA Set the output resolution to XGA
SXGA Set the output resolution to SXGA
UXGA Set the output resolution to UXGA
1080i Set the output resolution to 1080i
480p Set the output resolution to 480p
720p Set the output resolution to 720p
1080p Set the output resolution to 1080p
INFO Displays the selected input, the input
and output resolutions and the firmware
versions on the OSD
NATIVE Select the output resolution from the
EDID of the connected HDMI monitor
Four navigation keys
OK Press to accept changes
MENU Enter the OSD menu
EXIT EXIT the menu
POWER
SIZE
HD PC HDMI
VGA SVGA XGA
SXGA UXGA
1080i
1080p
480p 720p
NATIVE
EXIT
INFO
MENU
OK
Figure 4: Infra-Red Remote Control
Transmitter