7.4.2.2 Adjusting the Zoom Position
You can adjust the zoom position via one or more of the following methods:
Using the preset position control keys (see Figure 27) on the infra-red
remote control transmitter (see Figure 16), which instantly move the
position of the zoom to up to nine preset fixed locations
1
Figure 27: Preset Position Control Keys
Using the navigation control keys on the infra-red remote control transmitter
(see Figure 16), to fine tune the zoom position (that is, to slowly zoom-in at any
location on the screen)
2
, as Figure 28 illustrates
Figure 28: Navigation Control Keys
Using the OSD Menu buttons (see Figure 29)
3
Figure 29: Geometry (Zoom Position Adjustment) Screen
1 For example, to zoom-in to the lower right corner of the image, press the button
2 For example, to zoom-in toward the lower right of the image, press the and the buttons separately, as required
3 For example, to zoom-in to the lower right part of the image instead of the top left part, press the + and DOWN OSD Menu
buttons on the front panel separately, as required
To Next Page
Loading...
