Overview
3
The transmission range between the HDMI source and the HDMI acceptor
can be extended up to:
• 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded
BC-DGKat524 cable
• 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded
BC-DGKat623 cable
• 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded
BC-DGKat7a23 cable
For optimum range
1
and performance, use Kramer's BC-DGKat524,
BC-DGKat623 and BC-DGKat7a23 cables.
3.1 WP-561/PT-561 HDMI Line Transmitter
The Kram
er WP-561 HDMI Line Transmitter is a wall plate module that
receives an HDMI signal, encodes it, and transmits it over two CAT 5
cables to the WP-562 or PT-562. The Kramer Pico TOOLS™ PT-561
HDMI Line Transmitter is a standalone device that performs the same
functions as the WP-561. The WP-561/PT-561 features:
• An HDMI input , and a pair of RJ-45 CAT 5 output connectors
• One power status LED
• Bandwidth up to 1.65Gbps
• EDID PassThru that passes EDID/HDCP signals from source to
display
• A bidirectional IR input/output transmitting and receiving IR
commands over the CAT 5 cable
2
• Power Connect™ feeding 5V DC over the CAT 5 cable from the
transmitter to the receiver
1 Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-
Kramer CAT 5, CAT 6 and CAT 7a cables may not reach these ranges
2 Compatible with a Kramer transmitter and via a Kramer external remote IR receiver: C-A35M/IRR or C-A35M/IRE or
C-A35M/2IRE
To Next Page
Loading...
