Kraus Bolden KPF-1610 - Codes;Standards Applicable; Faucet Warranty; Commercial Warranty; Care and Cleaning Instructions

Step 1: Remove mounting hardware
Remove the mounting
screws (3D), mounting nut
(3C), metal (3B) and rubber
washer (3A) from the
mounting pipe
1. Diagram and Parts List
Step1: Remove mounting hardware
Step2: Install faucet and mounting hardware
Step4: Attach spray hose and counterweight
Step5: Connect angle valve
Step3: Secure mounting hardware
Replacement Parts
Step 7: Flush spray hose
Step 2: Install faucet and mounting hardware
Insert faucet body (2) into
hole in countertop. Install
mounting hardware (3A, B,
C & D) from underneath the
countertop
3A
3B
3C
3D
1. Diagram and Parts List
Step1: Remove mounting hardware
Step2: Install faucet and mounting hardware
Step4: Attach spray hose and counterweight
Step5: Connect angle valve
Step3: Secure mounting hardware
Replacement Parts
Step 7: Flush spray hose
3A
3B
3C
3D