Kraus Bolden KPF-1610 - Warranty Claim Process; Limitation on Duration of Implied Warranties; Limitation of Special, Incidental or Consequential Damages

Step 3: Secure mounting hardware
Adjust direction of faucet
body (2) so that handle is on
right side of faucet. Tighten
mounting nut (3C) until snug.
Tighten mounting screws
(3D) with Phillips screwdriver
until snug
Step 4: Attach spray hose and counterweight
Connect spray hose (6)
to supply hose (4). Install
weight (8) on lowest
vertical point on spray
hose (6)
1. Diagram and Parts List
Step1: Remove mounting hardware
Step2: Install faucet and mounting hardware
Step4: Attach spray hose and counterweight
Step5: Connect angle valve
Step3: Secure mounting hardware
Replacement Parts
Step 7: Flush spray hose
3C
3D
1. Diagram and Parts List
Step1: Remove mounting hardware
Step2: Install faucet and mounting hardware
Step4: Attach spray hose and counterweight
Step5: Connect angle valve
Step3: Secure mounting hardware
Replacement Parts
Step 7: Flush spray hose
4
6
8