5 SERVICE
24
VA FLOWMETERS
www.krohne.com 09/2022 - 4000419908 - AD VA Mech Ex Gb-Db R08 en
Cleaning the measuring unit
Depending on the application, worst-case operating conditions may lead to reduced measuring
performance as a result of fouling of the measuring system. Clean the measuring unit in
accordance with the standard manual for non explosion-protected versions.
The measuring unit must be dismantled for cleaning. This dismantling will need to be
coord
inated with operating conditions (e.g. check for existence of a flammable liquid or explosive
atmosphere in or at the tank or pressurised tank) and is within the responsibility of the operator.
To do this, follow the instructions for exchanging the entire device (for details refer to
Dismantling
on page 23).
To Next Page
Loading...
