Need help?Do you have a question about the KROHNE DWM 2000 D and is the answer not in the manual?
General| Accuracy | ±0.5% of reading ±0.01 m/s |
|---|---|
| Operating pressure | Up to 40 bar |
| Material | Stainless steel |
| Connection | Flange |
| Measurement Principle | Variable area |
| Nominal Diameter | DN15 |
| Output Signal | 4-20 mA, HART |
| Power Supply | 24 V DC |
| Protection Class | IP67 |
To Next Page