KROHNE IFC 090 i User Manual

IFC090 FF 01/2005
KROHNE Messtechnik GmbH & Co. KG · Ludwig-Krohne-Str. 5  D-47058 Duisburg
Tel.: 0203-301 309  Fax: 0203-301389 · e-mail: krohne@krohne.de
Supplementary
Installation and
Operating Instructions
IFC 090, IFC 090 i
With FOUNDATION
FIELDBUS Communication

KROHNE IFC 090 i Specifications

General

Brand	KROHNE
Model	IFC 090 i
Category	Measuring Instruments
Language	English

Summary

Introduction

Installation and Operation

Details on installing and operating the IFC090 FF device with Foundation Fieldbus.

Electrical Connection of Foundation Fieldbus Devices

Details how to connect Foundation Fieldbus devices, including cable and ground connections.

Installation and Operation

Installation in the Hazardous Area, Bus Cable

IFC090-FF Block Description

IFC090-FF Configuration

Resource Block Configuration

Transducer Block Configuration

Analog Input Block Configuration

Integrator Blocks Configuration

Explains the configuration of the two Integrator Blocks for flow totalization.

Setting the Flow Direction

Type of Integration

Integrator Reset Strategies

Describes various reset strategies for integrators based on integration type.

Trip and Pre-trip Handling

Status Handling

Troubleshooting

BLOCK_ERROR

Lists and describes errors reflected in the BLOCK_ERR parameter for each block.

Resource Block Errors

Details block errors and recommended actions for the Resource Block.

Transducer Block Errors

Lists block errors and recommended actions for the Transducer Block.

Analog Input Block Errors

Details block errors and recommended actions for the Analog Input Block.

Integrator Blocks Errors

Lists block errors and recommended actions for the Integrator Blocks.

Transducer Block XD_ERROR

Measurement Value Status