Need help?Do you have a question about the KROHNE SU 600 and is the answer not in the manual?
General| Type | Ultrasonic flowmeter |
|---|---|
| Measuring Principle | Transit-time difference |
| Process Pressure | Up to 100 bar |
| Output Signal | 4-20 mA, pulse, frequency, relay |
| Power Supply | 24 VDC |
| Housing Material | Aluminum, stainless steel |
| Protection Degree | IP67 |
| Communication | HART, Modbus |
Operations must be done by trained personnel authorized by the operator or manufacturer.
Incorrect use can cause hazards like vessel overfill or component damage.
Requires observance of regulations, guidelines, and safety instructions.
Explains how the SU 600 conditions, powers, evaluates signals, and outputs data, including relay functions.
Covers safety, Ex applications, power supply, cable selection, screening, and grounding.
Step-by-step guide to connect SU 600, sensor cable, power supply, and outputs.
Covers adjustment, scaling, relay points, integration time, and output characteristics.
Troubleshooting causes of malfunction and error messages (E003, E014, E015, etc.).
To Next Page