SAFETY INSTRUCTIONS
1
7
MFC 400
www.krohne.com07/2016 - 4002075804 - MA MFC 400 R04 en
1.2 Intended use
The mass flowmeters are designed exclusively to directly measure mass flow rates, product
density and temperature as well to indirectly measure parameters such as the total volume and
concentration of dissolved substances as well as the volume flow rate.
1.3 CE certification
This device conforms with the most recent and up to date versions of the following:
• EMC Directive
• ATEX Directive
• Low Voltage Directive
• Pressure Equipment Directive
The manufacturer declares conformity and the device carries the CE mark.
DANGER!
For devices used in hazardous areas, additional safety notes apply; please refer to the Ex
documentation.
CAUTION!
For devices used in SIL applications, additional safety notes apply. For detailed information refer
to the "Safety manual".
WARNING!
If the device is not used according to the operating conditions (refer to chapter Technical data),
the intended protection could be affected.
INFORMATION!
This device is a Group 1, Class A device as specified within CISPR11:2009. It is intended for use in
industrial environment. There may be potential difficulties in ensuring electromagnetic
compatibility in other environments, due to conducted as well as radiated disturbances.
CE marking
To Next Page
