To Next Page
T
tiffany19Aug 19, 2025
How to fix a faulty KROHNE Measuring Instruments unit?
- HhmcgeeAug 19, 2025
If the KROHNE Measuring Instruments unit is faulty or malfunctioning, the suggested solution is to replace the device.
How to fix a faulty KROHNE Measuring Instruments unit?
If the KROHNE Measuring Instruments unit is faulty or malfunctioning, the suggested solution is to replace the device.
What to do if there is a short circuit in OUT1 and OUT2 of KROHNE AF-E 400 Measuring Instruments?
If there's a short circuit in switching outputs OUT1 and OUT2, or excessive current, check these outputs.
How to troubleshoot volumetric flow measurement error in KROHNE AF-E 400 Measuring Instruments?
If you encounter an error in volumetric flow measurement, check the volumetric flow measurement and replace the device.
What to do if there is a short circuit in OUT1 of KROHNE AF-E 400?
If there's a short circuit in switching output OUT1, or excessive current, check the output.
What to do if there is a short circuit in OUT2 of KROHNE Measuring Instruments?
If there's a short circuit in switching output OUT2, or excessive current, check the output.
What to do if the measuring range is exceeded in KROHNE AF-E 400 Measuring Instruments?
If the measuring range is exceeded, check the volumetric flow range and temperature range.
What to do if the measuring range is not reached in KROHNE AF-E 400?
If the measuring range is not reached, check the volumetric flow range and temperature range.
What to do if the detection zone is exceeded in KROHNE AF-E 400 Measuring Instruments?
If the detection zone is exceeded, check the volumetric flow range and temperature range.
What to do if the detection zone is not reached in KROHNE AF-E 400 Measuring Instruments?
If the detection zone is not reached, check the volumetric flow range and temperature range.
How to resolve parameter setting outside the valid range in KROHNE AF-E 400?
If the parameter setting is outside the valid range, repeat the parameter setting.
General| Type | Electromagnetic flow meter |
|---|---|
| Nominal diameter | DN 15 to DN 400 |
| Housing material | Stainless steel |
| Measuring Principle | Electromagnetic |
| Operating pressure | Max. 40 bar / 580 psi |
| Accuracy | ±0.2% of measured value ±1 mm/s |
| Lining material | PTFE |
| Electrode material | Platinum |
| Protection class | IP 67 |
| Output | 4-20 mA, pulse output |
| Communication | Modbus |
| Power Supply | 24 V DC |
| Material | Stainless steel |
