KROHNE TIDALFLUX IFM 4110 PF User Manual

7.30830.32.00
Installation and
operating
instructions
TIDALFLUX
IFM 4110 PF
Electromagnetic
flowmeter
in partially filled pipes
for water and waste water
©KROHNE 07 / 2002

KROHNE TIDALFLUX IFM 4110 PF Specifications

General

Device type	Electromagnetic flowmeter
Degree of protection	IP68
Electrode material	Stainless steel
Measurement Principle	Electromagnetic induction
Measuring range	0.1 to 10 m/s flow velocity
Accuracy	±0.5% of measured value
Output signal	4-20 mA
Digital communication	HART
Power supply	24 V DC
Housing material	Aluminum
Certifications	ATEX, IECEx, FM, CSA
Application	Partially filled pipes

Summary

Part A System installation and start-up

1 Installation of the primary head

Details on installing the primary head of the flowmeter system.

1.5 Electrical connections of primary head

Details on electrical connections for the primary head.

2 Installation of the signal converter

2.5 Outputs and inputs

Overview of the signal converter's outputs and inputs.

Part B Signal converter IFC 110 PF

4 Operating the signal converter

Guide to operating the IFC 110 PF signal converter.

Part C Special Applications, Functional Checks, Service and Order Numbers

6 Special applications

Covers special applications like hazardous areas and magnetic sensors.

8 Service

Procedures for servicing and maintenance of the flowmeter.

Part D Technical Data, Measuring Principle and Block Diagram

10 Technical data

Detailed technical specifications for the flowmeter system.

10.1 Primary head IFS 4000 PF

Technical data specific to the IFS 4000 PF primary head.

10.2 Signal converter IFC 110 PF

Technical data specific to the IFC 110 PF signal converter.

12 Measuring principle

Part E Index

If you need to return flowmeters for testing or repairing to Krohne