To Next PageTo Next Page
Need help?Do you have a question about the KROHNE UFC 300 P and is the answer not in the manual?
General| Housing Material | Aluminum or stainless steel |
|---|---|
| Measurement Principle | Ultrasonic transit-time |
| Application | Liquid and gas flow measurement |
| Nominal Diameter | DN15...300 (½...12") |
| Accuracy | ±1% of reading |
| Operating Temperature | -20°C to +60°C (ambient) |
| Pressure Rating | Up to 40 bar |
| Output Signals | 4-20 mA, pulse, frequency |
| Communication | HART, Modbus, PROFIBUS DP/PA, Foundation Fieldbus |
| Power Supply | 24 V DC |
| Protection Class | IP67 |
| Temperature Range | -40°C to +200°C (medium) |
The OPTISONIC 6300 P is a portable ultrasonic clamp-on flowmeter for liquid measurements.
Details available variants, standard included items, and optional accessories for the flowmeter.
Comprehensive technical specifications for the OPTISONIC 6300 P flowmeter.
Specifies the accuracy and repeatability of the flow measurements.
Covers power supply, battery, signal cables, USB, and Bluetooth connections.
Explains the purpose and application scope of the OPTISONIC 6300 P flowmeter.
Guides on selecting the optimal location for transducer mounting on the pipe.
Recommends positioning relative to control valves for optimal measurement.
Advises on placement relative to pumps for accurate flow readings.
Guides on charging the converter and installing the mobile application.
Instructions for mounting sensor rails using metal straps for DN15-250 pipes.
Step-by-step guide for attaching sensor rails with metal straps.
Instructions for mounting sensor rails using nylon straps for larger pipe diameters.
Guides on connecting the sensor cables to the converter and checking signal strength.
Outlines crucial safety precautions for electrical connections.
Details the power supply requirements and charging procedures for the converter.
Guides on connecting signal cables, ensuring matching calibration numbers.
