Kroll KG20 - Guarantee Request

48
Guarantee request
Kroll – Appliance, Product, type
Bought by (customer’s address)
Part A Installation
No. of serie Manufacturing date Date of purchase
Kroll heater authorised to be fired with
Installed and mounted at
Address
Confirming to the legal reglementations, fire protecting rules and instructions out of technical manuel
Notes
Name of technicien
Name and address of authorised and specialized company
Place Date Stamp Signature
Part B Setting into operation
Date of setting into operation and adjustment
Burner (multi oil, fuel, gas) used
Brand / type / manufacturer
Type Serien-Nr.
Burner installed Oil Gas Combined Gas/oil
Manufacturer Type No.
Oil burner Gas burner
Nozzle type Oil flow rate
Excess pres-
sure
pump
Type of
gas
Gas
Nozzle
Flow
pressure
Filter inlet
Flow pressure nozzle
mbar
Gas consumption
m³/h
1
st
. level 2
nd
level l/h bar
- mbar 1
st
. level 2
nd
level 1
st
. level 2
nd
level
Heat load Q
B
kW
Burner inlet
temperature
°C
Flue gas
temperature
°C
CO
2
Flue gas
losses
%
Soot level
Bacharach
scale
Heating
efficiency Q
N
KW
Air quantity
m³/h
Mean air
outlet
temperature
°C
Power
consumtpion
Fan motor
A
/
p
hase
Test data
Burner adjustement effeceted
Notes about chimneys
a) Type of chimney
b) Value of chimney draught
c) Length of chimney
d) Type of condensation drainage
Notes about installation of heater
a) Size of burner room m³
b) Size of hall m³
c) Air duct – length of duct
The burner has been installed and set into operation in accoradance with the installation and operating instructions
The customer has been fully instructed in the servicing and operation.
Date of delivery /installation Signature and stamp of heating contractor