Krone Big Pack 1290 - Page 491

Terminal – menus [Medium Plus/Comfort Plus Electronics] 9
Menu Structure 9.1
Supplement to Operating Instructions 150000773_00_en
BiG Pack 1270, BiG Pack 1270 XC, BiG Pack 1290, BiG Pack 1290 HDP, BiG Pack 1290 HDP XC, BiG Pack
1290 XC, BiG Pack 890, BiG Pack 890 XC
47
9 Terminal – menus [Medium Plus/Comfort Plus Electronics]
9.1 Menu Structure
The menu structure is divided into the following menus depending on the machine configuration.
Menu Sub-menu Designation
1 Knotter, refer to page52
1-1 Bale length correction value, refer to page53
1-2 Knotter signal, refer to page53
1-3 Knotter monitoring, refer to page54
1-4 Blowing interval, refer to page55
1-5 Blowing time, refer to page55
1-9 Calibrate MultiBale, refer to page56
2 Sensitivity of direction display, refer to page57
3 Central lubrication, refer to page58
4 Bale scales, refer to page59
5 Moisture measurement, refer to page60
5-1 Alarm message for moisture measurement, refer
to page61
5-2 Correction value for moisture measurement, refer
to page61
6 Silage additive system, refer to page63
13 Counter, refer to page63