Maintenance - Blade Changing
74
Pos: 136.10 /BA /Wartung/Mäh werke/Messerschr aub / Messersch nellverschluss/M esserschn ellverschluss H altebolzen 14mm @ 0\mo d_119726808787 5_78.docx @ 1 6444 @ 3 @ 1
13.1.3 Blade Quick-Fit Device
Danger! - Insufficient thickness of material on the retaining bolts.
Effect: Danger to life or serious injuries.
• At every blade changing check the thickness of the holding bolts material.
• Damage or worn retaining bolts must always be replaced by sets on each cutting
disc/blade drum!
• The material thickness of the retaining bolts must not be less than 14 mm at the weakest
point.
• The material thickness of the leaf spring must not be less than 3 mm at the weakest point.
Fig.
Pos: 136.11 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_1196 175311226_0.d ocx @ 4165 @ @ 1
To Next Page
Loading...
