Special equipment
90
Pos: 148.3 /BA/So nderausstatung /EasyCut / AM M ähwerke/U mbau für steiles Bergabmähen EC F280 M / 32 0M / 360M @ 103\mod_ 1332254073902 _78.docx @ 941 818 @ 2 @ 1
17.4 Conversion for mowing steep slopes
(EasyCut F 280 M, EasyCut F 320 M, EasyCut 360 M)
Fig.
• Remove plates (1,2)
• Remove cover (3) of mower drum (4).
• Remove mower drum (4).
Note
Keep the plates (1,2), cover (3) and mower drums (4) in a protected place for later
reinstallation.
Warning - Cutting disc installed incorrectly
Effect: Damage to the machine
Make certain the cutter discs are installed correctly! The installed cutting discs (5) must be
installed at a 90-degree offset to the adjacent mower drums / cutting discs.
To Next Page
Loading...
